• Archer Cut Men's Jeans Archer Cut

    Archer Cut

    Archer Cut

    Designed for a slimmer frame.

    The Archer is our slimmest cut, affectionately referred to as the “no-butt cut.” Designed with less room and rise through the seat with a slim leg and a moderate taper, this cut is for the man with thinner-than-average legs, and a flatter-than-average rear end. Our founder, Eric, wears the Archer Cut in size 36.

    See Sizing Details

    • Slimmer fit through seat and thigh
    • Slim tapered leg
    • Just a skosh below mid-rise
    • Heavyweight striped pocket lining
    • Raw copper button fly (why only button fly?)
    • Hand-cut and -hammered copper rivets
    • Hand-debossed, 7 oz. vegetable-tanned leather patch
    • Chainstitch hem
    • Finished with a 36” inseam (see here for custom inseam details)
    • Complimentary lifetime repair policy.

    Save

    $250.00
  • Boxer Cut Boxer Cut

    Boxer Cut

    The Boxer Cut

    Designed for a very athletic physique with a bigger back side.

    The Boxer Cut is patterned with plenty of room through the seat and thigh for the man with a relatively large butt-to-waist ratio, and a slight taper to balance out the silhouette. Do you find yourself sizing up in jeans to make enough room for your butt and thighs, then having to use a belt to cinch your jeans in at the waist? This cut is designed for you.

    See Sizing Details

    • Plenty of room through the seat and thigh with significant draw-in at the waist 
    • Modestly tapered leg
    • Mid-rise
    • Heavyweight striped pocket lining
    • Raw copper button fly (why only button fly?)
    • Hand-cut and -hammered copper rivets
    • Hand-debossed, 7 oz. vegetable-tanned leather patch
    • Chainstitch hem
    • Finished with a 36” inseam (see here for custom inseam details)
    • Complimentary lifetime repair policy.

    Save

    $250.00
  • Classic Cut Classic Cut

    The Classic Cut

    The Classic Cut

    Designed for the average frame.

    The Classic Cut is intended to fit the “middle-of-the-bell-curve” body type, slightly fitted through the hip and leg. This is a trim (not skinny) fit with a straight leg. The Classic Cut was the first cut we ever made. Not sure of which cut you wear? This is a good place to start.

    See Sizing Details

    • Fitted through seat and thigh
    • Trim straight leg
    • Just a skosh below mid-rise
    • Heavyweight striped pocket lining
    • Raw copper button fly (why only button fly?)
    • Hand-cut and -hammered copper rivets
    • Hand-debossed, 7 oz. vegetable-tanned leather patch
    • Chainstitch hem
    • Finished with a 36” inseam (see here for custom inseam details)
    • Complimentary lifetime repair policy.
    $250.00
  • Classic Taper Classic Taper

    Classic Taper Logo

    Classic Taper

    Designed for the average frame.

    The Classic Cut is intended to fit the “middle-of-the-bell-curve” body type, slightly fitted through the hip and leg. This is a trim (not skinny) fit with a straight leg. The Classic Cut was the first cut we ever made. Not sure which cut you wear? This is a good place to start.

    All of our jeans are made using US-sourced materials and are cut, sewn, and finished in-house in our sewing shop in Detroit. The denim, a 13.25 oz. redline selvedge denim from Cone Mills, is sanforized and raw; your jeans should feel snug (but not tight!) when you first try them on. Your jeans will begin to break in over the course of the first few wears an “give” in the places that are initially snug.

    See Sizing Details
    • Fitted through seat and thigh
    • Trim straight leg
    • Just a skosh below mid-rise
    • Heavyweight striped pocket lining
    • Raw copper button fly
    • Hand-cut and -hammered copper rivets
    • Hand-debossed, 7 oz. vegetable-tanned leather patch
    • Chainstitch hem
    • Finished with a 36” inseam
    • Complimentary lifetime repair policy.
    $250.00
  • Hockey Cut Hockey Cut

    Hockey Cut Logo

    Hockey Cut

    Designed for a more athletic build.

    The Hockey Cut is made for guys with a thicker build through the seat and thigh (also good for men who want a little more room to move.). Cut fuller through the hip and thigh, with a straight leg. This was the second cut we ever made - designed for a local hockey player whose body required a bit more room in the hip and thigh.

    All of our jeans are made using US-sourced materials and are cut, sewn, and finished in-house in our sewing shop in Detroit. The denim, a 13.25 oz. redline selvedge denim from Cone Mills, is sanforized and raw; your jeans should feel snug (but not tight!) when you first try them on. Your jeans will begin to break in over the course of the first few wears an “give” in the places that are initially snug.

    • A bit more room through seat and thigh
    • Slightly fuller straight leg
    • Mid-rise
    • Heavyweight striped pocket lining
    • Raw copper button fly (why only button fly?)
    • Hand-cut and -hammered copper rivets
    • Hand-debossed, 7 oz. vegetable-tanned leather patch
    • Chainstitch hem
    • Finished with a 36” inseam (see here for custom inseam details)
    • Complimentary lifetime repair policy.
    See Sizing Specs
    $250.00